Emergency shut-offARD-ES-004
Weld ends - preparation to specify connectionHigh-pressure cryogenic shut-off valve
PN160
A PN160 cryogenic shut-off series for DN10-40 welded lines, with hard-alloy sealing. The illustrated pneumatic assembly includes a cylindrical actuator, an open yoke, an extended neck and a T-bar manual override.
- Size
- DN 10-40
- Body material
- Stainless steel; exact grade to specify
- Connections
- Weld ends - preparation to specify
- Operation
- Pneumatic cylinder with manual override in illustrated arrangement
- Pressure
- PN160 (16.0 MPa nominal)
- Temperature
- -196 to +75°C
Engineered for your application
A PN160 cryogenic shut-off series for DN10-40 welded lines, with hard-alloy sealing. The illustrated pneumatic assembly includes a cylindrical actuator, an open yoke, an extended neck and a T-bar manual override.
Sizes and pressure ratings depend on construction, materials and configuration. Confirm the selected pressure-temperature rating with the quotation.
Technical data
The specification, in detail.
| Parameter | Technical specification |
|---|---|
| Size range | DN 10-40 |
| Pressure ratings | PN160 (16.0 MPa nominal) |
| Temperature range | -196 to +75°C |
| Medium | LNG / NG, LOX / O2, LN2 / N2, LAr / Ar |
| End connections | Weld ends - preparation to specify |
| Operation | Pneumatic cylinder with manual override in illustrated arrangement |
| Flow direction | Under the disc to above the disc |
| Inspection reference | GB/T 24918 |
Nominal pressure and ASME class are different rating systems. Confirm the pressure–temperature rating for the selected material and design.
End connections
Define the interface.
Shown configuration: a compact block body below a bolted bonnet and long neck, with an open-yoke pneumatic cylinder and T-bar manual override
| Connection detail | Connection / selection requirement |
|---|---|
| Connection options | Weld ends - preparation to specify |
| Interface selection | Specify the end standard, nominal size, pipe dimensions and required mating interface. |
| Weld preparation | The series is documented as welded. Specify BW/SW type, bore, pipe OD and wall thickness; no weld preparation is inferred from the illustration. |
The illustration shows one configuration. Published connection alternatives are options for enquiry; their availability depends on size, rating, material and design. Installation dimensions come from the drawing, not the illustration.
Materials
From body to seal.
| Component | Material / option |
|---|---|
| Body, bonnet and stem | Stainless steel; exact grade to specify |
| Seal | Hard alloy; grade to specify |
Published material alternatives are configuration-dependent. H.F. denotes hard facing; the exact grade and material certificates are confirmed with the offer.
Selection notes
Defined around your application.
- PN160 nominal-pressure series
- Hard-alloy sealing
- Extended-neck pneumatic assembly with manual override
| Engineering data | Configuration requirement |
|---|---|
| Duty definition | Specify differential pressure, flow direction, leakage requirement and operating frequency. |
| Pneumatic controls | Specify air supply, fail action, control signal, feedback and required manual-override operation. |
Sizes and pressure ratings depend on construction, materials and configuration. Confirm the selected pressure-temperature rating with the quotation.
Fail-open/fail-close action, spring arrangement, control supply, closing time and any ESD or SIL documentation are specified for the selected assembly; the photograph does not establish these functions.
Published ratings do not establish suitability for every listed medium. Oxygen cleaning, material compatibility, trapped-liquid relief and project approvals are specified for the selected assembly. Liquid-hydrogen and helium service require a separate temperature and material review.
Arden product datasheet
Product code ARD-ES-004 · Revision 2026-10-29. Product illustrations show one configuration; the approved order documentation defines the supplied assembly.
Download PDFDimensions
Plan the connection.
Need installation dimensions?
No numeric dimension table is published for this reference. Request a configuration-specific outline drawing with your enquiry.
Request dimensionsDocumentation
Product documents
Download the Arden data sheet for ARD-ES-004, or request the outline drawing for your selected configuration.
Product code ARD-ES-004 · Revision 2026-10-29. Illustrations show one configuration; approved order documentation defines the supplied assembly.
Explore the range
Another configuration?
Emergency shut-offARD-ES-001
Pneumatic emergency shut-off valve
- Size range
- DN 10–200
- Pressure ratings
- PN40 (4.0 MPa nominal)
- Temperature
- −196 to +60°C
- Connections
- Socket weld (SW)
- Medium
- LO2, LN2, LAr, LCO2, LNG
Emergency shut-offARD-ES-002
Cryogenic emergency shut-off valve · PN16 · BW
- Size range
- DN 65–100
- Pressure ratings
- PN16
- Temperature
- −196 to +80°C · series*
- Connections
- Butt weld (BW)
- Medium
- LNG, LOX, LN2, LAr
Emergency shut-offARD-ES-003
Cryogenic emergency shut-off valve · PN16/40 · SW
- Size range
- DN 10–50
- Pressure ratings
- PN16 · PN40
- Temperature
- −196 to +80°C · series*
- Connections
- Socket weld (SW)
- Medium
- LNG, LOX, LN2, LAr, CO2