Globe valvesARD-GL-003
Socket weld (SW) connectionCryogenic angle globe valve
Socket weld (SW)
An angle-body globe valve for installations that require a change in flow direction within the valve.
Size and pressure options require technical confirmation.
- Size
- DN 15-50
- Body material
- 304
- Connections
- Socket weld (SW)
- Temperature
- −196 to +60°C
- Pressure
- PN16 / PN25 / PN40
- Medium
- LO2, LN2, LAr, LCO2
Engineered for your application
An angle-body globe valve for installations that require a change in flow direction within the valve.
These size and pressure ranges are subject to technical confirmation. They are not verified availability or approved operating limits. Exact size, rating, materials and design temperature require written confirmation.
Applications
Industrial GasesTechnical data
The specification, in detail.
| Parameter | Technical specification |
|---|---|
| Size range | DN 15-50 |
| Pressure ratings | PN16 / PN25 / PN40 |
| End connections | Socket weld (SW) |
| Medium | LO2, LN2, LAr, LCO2 |
| Temperature range | -196 to +60°C |
| Flow direction | Low to high |
Nominal pressure and ASME class are different rating systems. Confirm the pressure–temperature rating for the selected material and design.
End connections
Define the interface.
Shown configuration: Two socket-weld ports arranged at 90°; one side outlet and one bottom outlet.
| Connection detail | Connection / selection requirement |
|---|---|
| Published connection | Socket Welding |
| Connection standard | Not specified on this product page. Confirm the mating standard with the offer. |
| Weld selection | Specify pipe OD, wall thickness/schedule, material and weld preparation. SW and BW are different connections. |
The illustration shows one configuration. Published connection alternatives are options for enquiry; their availability depends on size, rating, material and design. Installation dimensions come from the drawing, not the illustration.
Materials
From body to seal.
| Component | Material / option |
|---|---|
| Body | 304 |
| Bonnet | composite |
| Stem | 06Cr19Ni10 |
| Top / closure element | 06Cr19Ni10+PTFE |
| Gasket | PTFE |
Published material alternatives are configuration-dependent. H.F. denotes hard facing; the exact grade and material certificates are confirmed with the offer.
Selection notes
Defined around your application.
- Socket Welding
- Flow direction: Low to high
These size and pressure ranges are subject to technical confirmation. They are not verified availability or approved operating limits. Exact size, rating, materials and design temperature require written confirmation.
The technical panel lists DN 40; the dimensional table also lists DN 50 and DN 65. Confirm the required size and rating with your enquiry.
“Top / closure element” follows the component designation in the reference material list.
Available dimensional data: DN 40; 4.0 MPa. Other sizes and ratings require technical confirmation.
Published ratings do not establish suitability for every listed medium. Oxygen cleaning, material compatibility, trapped-liquid relief and project approvals are specified for the selected assembly. Liquid-hydrogen and helium service require a separate temperature and material review.
Arden product datasheet
Product code ARD-GL-003 · Revision 2026-10-28. Product illustrations show one configuration; the approved order documentation defines the supplied assembly.
Download PDFDimensions
Plan the connection.
Dimensions apply to the tabulated version only. Confirm the approved outline drawing for the selected size, rating and connections before installation.
| DN | H/Open | H/Close | D0 | L1 | L2 | D1 | B | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 40 | 358 | 340 | 100 | 60 | 62 | 45.5 | 10 | — |
| 50 | 370 | 350 | 140 | 70 | 70 | 57.5 | 10 | — |
| 65 | 388 | 363 | 160 | 80 | 80 | 77 | 10 | — |
Linear dimensions are in mm and weights in kg unless stated otherwise. Pressure bands in MPa, thread designations and ISO mounting codes are not linear dimensions. Thread designations follow the reference. An em dash means no value is published. Confirm a certified outline drawing for the selected configuration.
Documentation
Product documents
Download the Arden data sheet for ARD-GL-003, or request the outline drawing for your selected configuration.
Product code ARD-GL-003 · Revision 2026-10-28. Illustrations show one configuration; approved order documentation defines the supplied assembly.
Explore the range
Another configuration?
Globe valvesARD-GL-001
Long-stem globe valve · bolted bonnet
- Size range
- DN 15–50
- Pressure ratings
- PN40 (4.0 MPa nominal)
- Temperature
- −196 to +60°C
- Connections
- Socket weld (SW)
- Medium
- LO2, LN2, LAr, LCO2, LNG
Globe valvesARD-GL-002
Long-stem globe valve · union bonnet
- Size range
- DN 10–40
- Pressure ratings
- PN40 (4.0 MPa nominal)
- Temperature
- −196 to +60°C
- Connections
- Socket weld (SW)
- Medium
- LO2, LN2, LAr, LCO2
Globe valvesARD-GL-004
Forged cryogenic globe valve
- Size range
- ½–2 in
- Pressure ratings
- ASME Class 150–1500
- Temperature
- Down to −196°C
- Connections
- Socket weld (SW) · Flanged